ARDAFLEX MULTI
Ardaflex Multi is a one-component, moisture curing hybrid-multi-purpose adhesive on the basis of SMP-technology.
Suitable for laying ceramic tiles and plates on indoor wall and floor surfaces. Applicable for industrial production.
As adhesive on small surfaces for the repair of parquet, tile and carpet floorings.
For bonding of, for instance, PU foam plates, rigid foam plates, stone wool, etc.
For laying metal tiles on absorbent and non-absorbent substrates
For bonding of metal plates on magnetic walls
Ardaflex Multi is highly elastic with very high initial adhesion and very good adhesive characteristics, also on non-absorbent substrates. Especially applicable for laying of ceramic tiles on degreased metal, aluminium, and steel substrates.
Ardaflex Multi reduces impact noise and room sound in connection with ceramic tiles and plates. Ardaflex Multi is a very low-emission adhesive as per GEV-EMICODE EC 1R plus, and is free from solvent as well as odourless.
APLICATION AREA
1.2 kg/m²,
4 X 4 X 4 mm (C1)
1.3 kg/m²,
6 X 6 X 6 mm (C2)
DOWNLOADS
Download Technical datasheet

MC200
Improved single-component C2T adhesive for the installation of ceramic and natural stone coatings of all porosities and large formats (up to 3600 cm²).
Interior walls and indoor / outdoor floors.
New works and renovation.
Allows the application of tiles on: floors on crawl space, intermediate floors, terraces, ponds and pools.
COLORS:
White, Grey
DOWNLOADS
Download Technical datasheet

MC300
Improved Flexible Tile adhesive C2 S1 ET, one-component, multi-purpose, for bonding ceramic tiles with low absorbency and very large sizes (up to 10 000 cm2), for interior and exterior, walls and floors.
Allows the application of ceramic and natural stone coatings on deformable substrates, radiant floors (PRE), heated floors, inverted floors, floors on crawl space, and floors on unheated premises, intermediate floors, terraces, balconies, and facade up to 28 m high, walls of very damp rooms (pools).
COLORS:
White, Grey
DOWNLOADS
Download Technical datasheet

CERABEST GOLD
CeraBest Gold is a C1TE class, water and humidity resistant, TSE certified, cement-based adhesive mortar. The product is produced in accordance with EN 12004. It is used for the adhesion of finishing materials such as ceramic, glazed tile, and mosaic on the floor and walls.
APPLICATION AREAS
-Indoors and outdoors
-Horizontally and vertically
-On walls and floors
-Used for adhering chinaware, ceramic, porous and non-porous ceramic plates, key-stone, etc. all kinds of stone, concrete and stone derivative plates.
FEATURES
-Resistant to water and humidity
-Long run duration
-Durable
-Plastic consistency, easy-to-apply
-Does not slip vertically
-Hydraulic bonding quality
-Fireproof
-Flexible
DOWNLOADS
Download Technical datasheet

J175 JOINT FLEX
Cementone Brick & Patio Cleaner is an effective and economical way to remove stains and limescale from brickwork, concrete, paving, tiles, etc. It also cleans away dirt, grime and algae.
APPLICATION AREAS
3-5 m2/L
1 Part: 3 Parts Water
DOWNLOADS
Download Technical datasheet

J300 EPOCOLOR
J300 Epocolor is an epoxy bonding and grouting mortar for resistant bonding and sealing (2 to 15 mm) to chemical aggression and heavy traffic. Particularly suitable for industrial premises, agro-food industries, laboratories, hospitals, swimming pools, sanitary facilities, etc. It is also used for bonding and grouting mosaics in pools on concrete or cement substrates. It may be used for renovations. Resistant without cracking or degradation to heavy traffic and high pressure cleaning.
According to the DTU and CPT in force, the width of the joints on the ground must be ≥ 4 mm.
Tile Joint Consumption:
E x P x ((L+I)/(I/L)) x (D/10) [kg/m2]
E= Tile thickness in mm
P= Joint width in mm
L= Length of the tiles in cm
I= Tile width in cm
D= Joint Density
DOWNLOADS
Download Technical datasheet
